Mountain Pass Performance Comfort Coilovers for the 2021-2023 Model 3 AWD offer a huge range of height adjustability with significantly more travel than stock. These coilovers were designed for the user that wants a similar ride to factory – even slightly softer, while having the ability to fine tune the ride height to his or her exact preference.
This suspension kit utilizes the factory rear spring mounting location – as designed by Tesla.
This suspension kit comes with a 2-year warranty (void with track-use, as is KW policy), complete documentation including instructions and recommended initial ride height settings. Installation is very straight forward. The OEM top-hats are to be re-used and as such so a spring compressor is required to disassemble the factory front dampers. Nothing on the car needs to be permanently modified or damaged for installation.
ONLY AVAILABLE FOR LOCAL PURCHASE AND INSTALL
Spring rates set for comfortable driving, very similar to factory spring rates.
Height adjustable from factory ride height down to 50mm below stock.
Progressive bump rubbers tuned to engage only in the most aggressive bumps to not add to ride harshness under normal conditions.
Utilize the OEM upper hats for minimum NVH transmitted into the cabin. No spherical bearings to clunk and transmit road noise!
Bolt-in installation. A competent shop can have these coilovers installed in 3.5 hours.
Composite spring perch that will not seize to damper body over time as many aluminum products tend to.